Publications in Journals

S.No. Author(s) Year Title Complete Reference of Journal
1. R A Mali, TVK Gupta, J Ramkumar 2021 A comprehensive review of free-form surface milling Advances over a decade Journal of Manufacturing Processes 62, 132-167
2. V Sharma, D S Patel, V Agrawal, V K Jain, J Ramkumar 2021 Investigations into machining accuracy and quality in wire electrochemical micromachining under sinusoidal and triangular voltage pulse condition Journal of Manufacturing Processes 62, 348-367
3. M Singh, S Mishra, V Yadava, J Ramkumar 2021 Parametric Analysis of Laser Beam Percussion Drilling for Thin Titanium Alloy Sheet Using Yb: Yag Fiber Laser Journal of Advanced Manufacturing Systems
4. A Rajput, J Ramkumar, K Mondal 2021 Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel Ultrasonics Sonochemistry 71, 105399
5. Y K Penke, A K Yadav, I Malik, A Tyagi, J Ramkumar, K K Kar 2021 Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO Chemosphere 267, 129246
6. J Ramkumar, G Ranjit, V Sarath, V Vikraman, B Suresh, NP Babu, M Amit 2020 Design Optimization of Lubrication System for a Four-Cylinder Diesel Engine Advances in Automotive Technologies, 139-155
7. A S Shirale, S Sahu, S K Patel, J Ramkumar, S Shekhar 2020 An analytical modelling of cutting forces in orthogonal elliptical vibration cutting Journal of Micromanufacturing, 2516598420936131
8. S Kumar, K K Singh, J Ramkumar 2020 Comparative study of the influence of graphene nanoplatelets filler on the mechanical and tribological behavior of glass fabric-reinforced epoxy composites Polymer Composites 41 (12), 5403-5417
9. Y K Penke, P Sinha, A K Yadav, J Ramkumar, K K Kar 2020 Al3+-doped 3d-transitional metal (Mn/Cu) ferrite impregnated rGO for PEC water-splitting/supercapacitor electrode with oxygen vacancies and surface intercalation aspects Composites Part B: Engineering 202, 108431
10. M Law, R Karthik, S Sharma, J Ramkumar 2020 Finish turning of hardened bearing steel using textured PcBN tools Journal of Manufacturing Processes 60, 144-161
11. M Singh, V K Jain, J Ramkumar 2020 Micro-texturing on flat and cylindrical surfaces using electric discharge micromachining Journal of Micromanufacturing, 2516598420980404
12. D S Patel, V Agrawal, J Ramkumar, V K Jain, G Singh 2020 Micro-texturing on free-form surfaces using flexible-electrode through-mask electrochemical micromachining Journal of Materials Processing Technology, 282, 116644
13. BSA Vardhaman, M Amarnath, J Ramkumar, K Mondal 2020 Enhanced tribological performances of zinc Oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil Materials Chemistry and Physics, 123447
14. Y K Penke, A K Yadav, P Sinha, I Malik, J Ramkumar, K K Kar 2020 Arsenic remediation onto redox and photo-catalytic/electrocatalytic Mn-Al-Fe impregnated rGO: Sustainable aspects of sludge as supercapacitor Chemical Engineering Journal 390, 124000
15. M Singh, P Saxena, J Ramkumar, R V Rao 2020 Multi-spark numerical simulation of the micro-EDM process: an extension of a single-spark numerical study The International Journal of Advanced Manufacturing Technology, 1-15
16. E Saraswat, H S Maharana, SVSN Murty, S Shekhar, K K Kar, J Ramkumar 2020 Fabrication of Al-Si controlled expansion alloys by unique combination of pressureless sintering and hot forging Advanced Powder Technology
17. Y Tayde, K Chaudhary, G Singh, A Dhumal, M Saikia, KV Srivastava 2020 An optically transparent and flexible microwave absorber for X and Ku bands application Microwave and Optical Technology Letters 62 (5), 1850-1859
18. R K Thakur, K K Singh, J Ramkumar 2020 Delamination analysis and hole quality of hybrid FRP composite using abrasive water jet machining Materials Today: Proceedings
19. L Nagdeve, V K Jain, J Ramkumar 2020 Optimization of process parameters in nano-finishing of Co-Cr-Mo alloy knee joint Materials and Manufacturing Processes, 1-8
20. D S Patel, V Sharma, VK Jain, J Ramkumar 2020 Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform International Journal of Machine Tools and Manufacture 151, 103526
21. P Tripathi, P K Katiyar, J Ramkumar, K Balani 2020 Synergistic role of carbon nanotube and yttria stabilised zirconia reinforcement on wear and corrosion resistance of Cr-based nano-composite coatings Surface and Coatings Technology 385, 125381
22. H S Maharana, SVSN Murty, J Ramkumar, K Mondal 2020 Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution Journal of Alloys and Compounds 817, 153263
23. J M Jafferson, P Hariharan, J Ramkumar 2020 Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in MircoED-Milling of Cryogenic-Treated Tool and Workpiece Journal of Micro and Nano-Manufacturing 8 (1)
24. K Chaudhary, G Singh, J Ramkumar, S A Ramakrishna, K V Srivastava, 2020 Optically transparent protective coating for ITO-coated PET-based microwave metamaterial absorbers IEEE Transactions on Components, Packaging and Manufacturing Technology 10
25. R N Yadav, R K Porwal, J Ramkumar 2020 Experimental Modeling of EDMed Aluminum Metal Metrix Composite: A Review Emerging Trends in Mechanical Engineering, 511-518
26. RK Thakur, KK Singh, J Ramkumar 2020 Experimental investigation of abrasive waterjet hole cutting on hybrid carbon/glass composite Materials Today: Proceedings 21, 1551-1558
27. V Mandal, A Singh, GS Yadav, J Ramkumar, S Agrawal 2020 Experimental Investigation on Surface Topography of the Natural Ceramics in Abrasive Water Jet Cutting and Its Optimization Validation by Formulated Model Advances in Unconventional Machining and Composites, 347-360
28. V Sharma, V K Jain, J Ramkumar 2020 Investigations into Wire Electrochemical Machining of Stainless Steel 304 Advances in Unconventional Machining and Composites, 41-52
29. V Mandal, S Sharma, J Ramkumar 2020 Numerical Simulation of Heat Transfer and Fluid Flow in Co-axial Laser Cladding of Ti6Al4V Alloys Advances in Simulation, Product Design and Development, 241-254
30. Yaswanth K.Penke, Amit Yadav, Prerna Sinha, Iram Malik, Janakarajan Ramkumar and Kamal K Kar 2020 Arsenic Remediation onto Redox and Photo-catalytic/electrocatalytic Mn-Al-Fe Impregnated rGO: Sustainable Aspects of Sludge as Supercapacitor Chemical Engineering Journal, doi.org/10.1016/j.cej.2019.124000
31. Leeladhar Nagdev, V.K Jain and J. Ramkumar 2019 Development of inverse replica fixture for Nano-finishing of knee joint using R-MRAFF process Journal of micromanufaturing (JMF)
32. Ganesh B. Shirsatha, K. Muralidhara, Raj Ganesh S. Pal, J. Ramkumar 2019 Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge Applied Surface Science. doi:10.1016/j.apsusc.2019.04.076
33. H.S. Maharana, Ravi Kumar, S.V.S. Narayana Murty, J. Ramkumar, K. Mondal 2019 Surface micro-texturing of dual phase steel and copper by combining laser machining and electrochemical dissolution Journal of Materials Processing Technology, 116260. doi:10.1016/j.jmatprotec.2019.116260
34. Pragya Tripathi, J. Ramkumar, Kantesh Balani 2019 Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes Surface & Coatings Technology,Volume 378, 124919, https://doi.org/10.1016/j.surfcoat.2019.124919
35. Mahavir Singh, Amandeep Singh, J. Ramkumar 2019 Thin-wall micromachining of Ti-6Al-4V using micro-wire electrical discharge machining process Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41:338, https://doi.org/10.1007/s40430-019-1827-3
36. Mahavir Singh, J. Ramkumar, R. V. Rao, J. Balic 2019 Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm Advances in Production Engineering & Management, 14(2), https://doi.org/10.14743/apem2019.2.326
37. V. Sharma, I. Srivastava, V.K. Jain, J. Ramkumar 2019 Modelling of Wire Electrochemical Micromachining (Wire-ECMM) process for anode shape prediction using finite element method Electrochimica Acta
38. G. Singh, H. Sheokand, K. Chaudhary, K.V. Srivastava, J. Ramkumar, 2019 Fabrication of non-wettable wearable textile based metamaterial microwave absorber Journal of Physics D: Applied Physics
39. S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar 2019 Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications Journal of Manufacturing Processes, 39, 282-294
40. D.S. Patel, V.K. Jain, A Shrivastava, J. Ramkumar 2019 Electrochemical micro texturing on flat and curved surfaces: simulation and experiments The International Journal of Advanced Manufacturing Technology, 100, 1269-1286
41. Penke, Y. K., Tiwari, N., Jha, S., Bhattacharyya, D., Ramkumar, J., & Kar, K. K 2019 Arsenic surface complexation behaviour in aqueous systems onto Al substituted Ni, Co, Mn, and Cu based ferrite nano adsorbents Journal of hazardous materials, 361, 383-393
42. Singh, G., Sheokand, H., Ghosh, S., Srivastava, K. V., Ramkumar, J., & Ramakrishna, S. A. 2019 Excimer laser micromachining of indium tin oxide for fabrication of optically transparent metamaterial absorbers Applied Physics A, 125(1), 23
43. Sheokand, H., Singh, G., Ghosh, S., Ramkumar, J., Ramakrishna, S. A., & Srivastava, K. V. 2019 An Optically Transparent Broadband Microwave Absorber Using Interdigital Capacitance IEEE Antennas and Wireless Propagation Letters, 18(1), 113-117
44. Sharma, V., Srivastava, I., Tyagi, A., Jain, V. K., & Ramkumar, J. 2018 Theoretical and Experimental Investigations into Wire Electrochemical Turning (Wire-ECTrg) Process Using Finite Element Method Journal of The Electrochemical Society, 165(14), E773-E783
45. Durwesh Jhodkar, M. Amarnath, H. Chelladurai, J. Ramkumar 2018 Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation Journal of Materials Engineering and Performance,27(12), 6374-6388
46. Yaswanth K. Penke, Ganapathi Anantharaman, Janakarajan Ramkumar, Kamal K. Kar 2018 Redox Synergistic Mn-Al-Fe and Cu-Al-Fe Ternary Metal Oxide Nano Adsorbents for Arsenic Remediation with Environmentally Stable As(0) Formation Journal of Hazardous Materials,364, 519-530
47. S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar 2018 Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4 Journal of Materials Processing Technology, 262, 131-148
48. Hitendra Kumar, J. Ramkumar, K.S. Venkatesh 2018 Surface texture evaluation using 3D reconstruction from images by parametric anisotropic BRDF Measurement,125, 612-633
49. A. K. Yadav, S. Banerjee, R Kumar, K. K. Kar, J. Ramkumar, K. Dasgupta 2018 Mechanical Analysis of Nickel Particle-Coated Carbon Fiber-Reinforced Epoxy Composites for Advanced Structural Applications ACS Applied Nano Materials,1(8), 4332-4339
50. Pragya Shukla, Shikha Awasthi, Janakarajan Ramkumar, Kantesh Balani 2018 Protective trivalent Cr-based electrochemical coatings for gun barrels Journal of Alloys and Compounds, 768, 1039-1048
51. Divyansh Singh Patel, Abhilasha Singh, K. Balani, J. Ramkumar 2018 Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V Surface and Coatings Technology, 2018
52. M. R. Sankar, V. K. Jain, J. Ramkumar, S. K. Sareen, S. Singh 2018 Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs The International Journal of Advanced Manufacturing Technology , 1-15
53. V Sharma, D.S. Patel, V.K. Jain, J. Ramkumar, A Tyagi 2018 Wire Electrochemical Threading: A Technique for Fabricating Macro/Micro Thread Profiles Journal of The Electrochemical Society, 165(9), E397-E405
54. L. Nagdeve, V. K. Jain, J. Ramkumar 2018 Nanofinishing of freeform/sculptured surfaces: state-of-the-art Manufacturing Review,5, 6
55. Durwesh Jhodkar, M. Amarnath, H. Chelladurai, and J. Ramkumar 2018 Performance assessment of microwave treated WC insert while turning AISI 1040 steel Journal of Mechanical Science and Technology, 32(6), 2551-2558
56. Amandeep Singh , Deepu Philip , J. Ramkumar , Mainak Das 2018 A simulation based approach to realize green factory from unit green manufacturing processes Journal of Cleaner Production , 182, 67-81
57. Durwesh Jhodkar, H. Chelladurai, Akhilesh Kumar Choudhary & J. Ramkumar 2018 Comparison of machining performance of microwave post-heated WC insert with dry, wet and MQL cutting in turning operation Journal of Microwave Power and Electromagnetic Energy, 52(2), 109-127
58. Koshal Kishor, Alhad Parashtekar, Sulay Saha, Sri Sivakumar, Janakarajan Ramkumar and Raj Ganesh S. Pala 2018 Rational Design Strategy for Optimization of Clamping Pressure to Minimize Contact Resistance between Electrode and Current Collector while Preserving Porosity of Electrodes in Water Electrolyzers Canadian Journal of Chemical Engineering,96(4), 881-885
59. Durwesh Jhodkar, M. Amarnath, H. Chelladurai,J.Ramkumar 2018 Experimental investigations to enhance the machining performance of tungsten carbide tool insert using microwave treatment process Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), 200
60. Ambuj Shah, Arvind Kumar , J. Ramkumar 2018 Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel Journal of Materials Processing Technology, 256, 109-120
61. Kiran Kumar Surthi , Bibekananda De, J. Ramkumar , Kamal K. Kar 2018 Enhancement of the surface reactivity of zigzag boron nitride nanoribbons by chlorine gas decoration: A computational study Journal of Physics and Chemistry of Solids, 120, 34-43
62. B.S. Ajay Vardhaman, M. Amarnath, J. Ramkumar, and Prabhat K. Rai 2018 Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy Journal of Materials Engineering and Performance, (2018): 1-14
63. Divyansh Singh Patel, Abhilasha Singh, V. K. Jain, J. Ramkumar & A. Shrivastava 2017 Investigations into insertion force of electrochemically micro-textured hypodermic needles The International Journal of Advanced Manufacturing Technology , (2017): 1-16
64. Leeladhar Nagdeve, V. K. Jain and J. Ramkumar 2017 Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture The International Journal of Advanced Manufacturing Technology, (2017): 1-12
65. Abhilasha Singh, Divyansh Singh Patel, J. Ramkumar & Kantesh Balani 2017 Single step laser surface texturing for enhancing contact angle and tribological properties Int J Adv Manuf Technology, (2017):1-15
66. Harsh Sheokand, Saptarshi Ghosh, Gaganpreet Singh, Mondeep Saikia, Kumar Vaibhav Srivastava, J. Ramkumar, and S. Anantha Ramakrishna 2017 Transparent broadband metamaterial absorber based on resistive films Journal of Applied Physics, 122(10), 105105
67. Sahil Kajal, Leeladhar Nagdeve,V. K. Jain & J. Ramkumar 2017 Experimental and theoretical investigations into internal Magnetic Abrasive Finishing of a Revolver Barrel International Journal of Advanced Manufacturing Technology(2017):1-18
68. G.V.L. Parameswari, V. K. Jain & J. Ramkumar,Leeladhar Nagdeve 2017 Experimental investigations into nano finishing of Ti6Al4V flat disc using Magnetorheological finishing process International Journal of Advanced Manufacturing Technology, 1-11,2017
69. Aakash Tyagi,Vyom Sharma, V. K. Jain & J. Ramkumar 2017 Investigations into side gap in Wire Electrochemical Micromachining (Wire-ECMM) International Journal of Advanced Manufacturing Technology, 94(9-12), 4469-4478
70. Leeladhar Nagdeve, V. K. Jain & J. Ramkumar 2017 Differential finishing of freeform surfaces (Knee Joint) using R-MRAFF process and negative replica of workpiece as a fixture Machining Science and Technology, 22(4), 671-695
71. Leeladhar Nagdeve, Ajay Sidpara, V. K. Jain & J. Ramkumar 2017 On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process Machining Science and Technology, 22(3), 493-506
72. Yaswanth K. Penke , Ganapathi Anantharaman, Janakarajan Ramkumar, and Kamal K. Kar 2017 Aluminum Substituted Cobalt Ferrite (Co-Al-Fe) Nano Adsorbent for Arsenic Adsorption in Aqueous Systems and Detailed Redox Behavior Study with XPS ACS Appl. Mater. Interfaces,9 (13), 11587-11598
73. Rao R.V., Rai D.P., Ramkumar J., Balic J. 2016 A new multi-objective Jaya algorithm for optimization of modern machining processes Advances in Production Engineering & Management, Volume 11,Number 4, pp 271-286
74. F. Islam, B. Crawford, P. Pal, J. Ramkumar, A.S. Milani 2016 Modelling of nano-finishing forces and surface roughness in abrasive flow finishing process using rheological properties International Journal of Precision Technology 6 (2), 123-141
75. P Murkute, J Ramkumar, K Mondal 2016 Stress Corrosion Cracking Behavior of Interstitial Free Steel Via Slow Strain Rate Technique Journal of Materials Engineering and Performance 25 (7), 2878-2888
76. P Murkute, S Choudhary, J Ramkumar, K Mondal 2016 Effect of Exposure Face Orientation and Tilt Angle on Immersion Corrosion Behavior of Dual-Phase and Mild Steels Journal of Materials Engineering and Performance, 1-10
77. P Murkute, J Ramkumar, S Choudhary, K Mondal` 2016 Effect of alternate corrosion and wear on the overall degradation of a dual phase and a mild steel Wear 368, 368-378
78. Amandeep Singh, Deepu Philip , J. Ramkumar 2016 Green Index quantification of a unit manufacturing process through simulation experiments Procedia CIRP 41 1131-1136
79. Prateek Khare, Ashish Yadav, Janakranjan Ramkumar, Nishith Verma 2016 Microchannel-embedded metal-carbon-polymer nanocomposite as a novel support for chitosan for efficient removal of hexavalent chromium from water under dynamic conditions Chemical Engineering Journal 293 (2016) 44-54
80. Leeladhar Nagdeve, V. K. Jain, J. Ramkumar 2016 Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint Procedia CIRP 42 ( 2016 ) 793-798
81. M. Ravi Sankar, V. K. Jain, J. Ramkumar 2016 Nano-finishing of cylindrical hard steel tubes using rotational abrasive flow finishing (R-AFF) process Int J Adv Manuf Technol DOI 10.1007/s00170-015-8189-5
82. Rita Maurya, Binit Kumar, S. Ariharan, J. Ramkumar, Kantesh Balani 2016 Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy Materials and Design 98 (2016) 155-166.
83. Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. 2015 Excimer laser micromachining of oblique micro channels on thin metal films using square laser spot Ref no:- Ms. No.SADH-D- 15-00069R3
84. Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. 2015 Micro feature edge quality enhancement in excimer laser micromachining of metal films by coating with a sacrificial polymer layer Journal of Micromechanics and Microengineering, 25(6), 065001.
85. T. V. K. Gupta, J. Ramkumar , Puneet Tandon , N. S. Vyas 2015 Application of Artificial Neural Networks in Abrasive Water Jet Milling Procedia CIRP 37 ( 2015 ) 225-229.
86. F. Islam, J. Ramkumar & A.S. Milani 2015 A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics Polymer & Composites Science, 1:4, 175-184, DOI: 10.1080/20550340.2015.1117747.
87. Bhargava, Neelima; Shanmugaiah, Vellasamy; Balakrishnan, Karuppiah; Ramkumar, Janakarajan; Das, Mainak 2015 Comparing the Adhesion and Survival of Adult Rod and Cone Photoreceptor Neurons on Poly-D-Lysine and Concanavalin-A Substrate Journal of Biomaterials and Tissue Engineering, Volume 5, Number 6, June 2015, pp. 431-438(8).
88. Nishith Verma, Prateek Khare, Janakaranjan Ramkumar, 2015 Control of Bacterial Growth in Water using Novel Laser-Ablated Metal-Carbon-Polymer Nanocomposite-based Microchannels Chemical Engineering Journal 276 (2015) 65-74.
89. Durwesh Jhodkar, H. chelladurai, M. Amarnath and J. Ramkumar 2015 Performance evaluation of Microwave Treated Cemented Carbide insert on AISI 1040 steel during turning process ASME 2015, Applied mechanics and materials conference.
McMat2015-6318
90. Amandeep Singh, Deepu Philip , J. Ramkumar 2015 Quantifying green manufacturability of a unit production process using simulation Procedia CIRP 29 ( 2015 ) 257-262
91. Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar and H. Chelladurai 2015 Examining the Role of Cutting Fluids in Machining AISI 1040 Steel Using Tungsten Carbide Insert under Minimal Quantity Lubrication Condition International Institute of Engineers
92. Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar, H. Chelladurai, M. K. Roy 2015 Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation Journal of Cleaner Production
93. Divyansh Patel, V. K. Jain, J. Ramkumar 2015 Micro texturing on metallic surfaces: State-of-the-art Proceedings of the Institution of Mechanical Engineers, Part B.
94. Divyansh Patel, V. K. Jain, J. Ramkumar 2015 Surface Texturing for Inducing Hydrophobicity Directions IIT Kanpur Publications, Vol. 15-1, pp. 46-53
95. Syed Nadeem Akhtar, Shashank Sharma, S. Anantha Ramakrishna, and J. Ramkumar 2015 Excimer laser micromachining of oblique microchannels on thin metal films using square laser spot Sadhana Academy Proceedings in Engineering Science
96. Dharmesh Kumar ; Syed N. Akhtar ; Anup K. Patel; J. Ramkumar ; Dr. Kantesh Balani 2015 Tribological Performance of Laser Peened Ti-6Al-4V Journal of Wear, 322, 203-217
97. B. Muralidharan, H. Chelladurai, J. Ramkumar 2015 Experimental Investigation on Electro-Discharge Deposition Process International Mechanical Engineering Congress and Exposition .Volume 76, Issue 1-4, pp. 69-82.
98. Jefferson, Hari and J. Ramkumar 2014 Micro machining performance and surface quality comparison of using cryogenically treated copper-tungsten tool/AISI 304 work piece in micro EDM milling Recent Patents on Mechanical Engineering.
Reference#: BSP-MENG-2014-56Machining Science and Technology
99. D. Jhodkar, M. Amaranth, H. Chelladurai, J. Ramkumar 2014 Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel Applied Mechanics and Materials 541, 368-373
100. R.K. Porwal, V. Yadava, J. Ramkumar 2014 Modelling and multi-response optimization of hole sinking electrical discharge micro machining of titanium alloy thin sheet Journal of Mechanical Science and Technology 28 (2), 653-661
101. K. Pallav, P. Han, J. Ramkumar, K. F. Ehmann 2014 Comparative Assessment of the Laser Induced Plasma Micro machining and the Micro-EDM Processes Journal of Manufacturing Science and Engineering 136 (1), 011001
102. G. Karthikeyan, J. Ramkumar, S. Dhamodaran 2014 Block EDG: issues and applicability in multiple pass micro ED-milling Machining Science and Technology 18 (1), 120-136
103. Syed Nadeem Akhtar, Hirendra Choudhary, S. Anantha Ramakrishna and J. Ramkumar 2014 Simulation and experiments on excimer laser micromachining of metal and polymer Journal of Micro / Nanolithography, MEMS, and MOEMS 13(1), 013008-013008
104. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2014 Neural Network based Modeling and GRA coupled PCA Optimization of Hole Sinking Electro Discharge Micro machining International Journal of Manufacturing, Materials, and Mechanical Engineering.
4(1), pp. 1-21.
105. Gupta T. V. K., Ramkumar J., Tandon P., and Vyas N.
S.,
2013 A study on deviations of the jet with traverse
speeds on different materials in pocket milling usingAbrasive Water Jet Machining Process
International Journal of Applied Mechanics and Materials, 372, 402-405.
106. T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas 2013 Role of process parameters on pocket milling with Abrasive Water Jet Machining technique International Journal of Mechanical Science and Engineering, 2013, Vol. 7, No. 10, pp. 627-632
107. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2013 Multi-Objective Optimization of Hole Drilling Electrical Discharge Micromachining Process using Grey Relational Analysis coupled with Principal Component Analysis Journal of The Institution of Engineers (India): Series C, Volume 94, ( 4), pp 317-325
108. Rajesh Kr. Porwal, Vinod Yadava, J. Ramkumar 2013 Optimization of process parameters in the hole sinking electro discharge micromachining using GRA-PCA Journal of Manufacturing Engineering, Vol. 8, ( 2), pp. 96-104
109. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2013 Modeling and Multi-Response Optimization of hole sinking electrical discharge micromachining of titanium alloy thin sheet Journal of Mechanical science and Technology, Paper number: MEST-D-1300358R1, 3(2), pp 183-205
110. Govind Dayal, Syed Nadeem Akhtar, S. Anatha Ramkrishnan and J. Ramkumar 2013 Excimer laser micromachining using binary mask protection for large are patterning with single micrometer feature J.Micro Nano-Manuf.1.031002 1(3) (7pages); DOI: 10.1115/1.4024880.
111. T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas 2013 A study on the deviations of the jet with traverse speeds of different materials in pocket milling using Abrasive water Jet Machining Processes Applied Mechanics & Materials, Vol.372,pp 402-405, Trans Tech Publications,
112. Kumar Pallav, Peidog Han, J. Ramkumar, NagHanumaiah, KornelEhman 2013 Comparative Assessment of the laser induced plasma Micro-Machining (LIP-MM) and the Micro-EDM processes J.Manuf.Sci.Eng, DOI 10.1115/1.4025391.
113. Avinash Kumar, Ankur Gupta, Rishi Kant, Syed Nadeem Akhtar, Nachiketa Tiwari, J. Ramkumar, Shantau Bhattachary 2013 Optimization of laser machining process for the preparation of photo masks and its application to micro systems fabrication Journal of Micro/Nanolithography, MEMS and MOEMS.Vo. 12. No.4 p041203 (9 pp)
114. Chandra Sekhar Sathua, V. K. Jain, J. Ramkumar, Ajay Sidpara 2013 Analysis of Forces and Surface Roughness in Magnetic Abrasive Finishing with a ball end tool Int.J. Precision Technology, Vol 3, No 2,pp 131-142
115. Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar 2013 Modeling and Optimization of Hole Drilling Electrical Discharge Micromachining Process of Ti-6Al-4V Thin Sheet International Journal of Precision Technology, Vol. 3, No.2, pp. 183-205
116. Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar 2013 Optimization of process parameters in the hole drilling electrical discharge micro machining of titanium based super alloy thin sheet. Journal of Machining and Forming Technology, Vol. 5, pp. 175-188
117. C. Samanta, D. S. Chander, J. Ramkumar, S. Dhamodaran 2012 Catalyst and its diameter dependent growth kinetics of CVD grown GaN nanowires Materials Research Bulletin 47 (4), 952-956
118. G. Karthikeyan, J. Ramkumar, S. Aravindan 2012 Performance analysis of micro ED-milling process using various statistical techniques International Journal of Machining and Machinability of Materials VO. 11 (2) pp. 183-203
119. Banerjee, A., Mankad, T., Dhamodaran, S., Ramkumar, J., Kulkarni 2012 Dynamic characterization and mechanical properties of FIB grown nano pillars International Journal of Nanotechnology 9 (10-12) , pp. 972-981
120. Rajesh kumar porwal, Vinod Yadava, J. Ramkumar 2012 Artificial neural network modeling and
multi objective optimization of hole drilling electro discharge micro machining of invar
International Journal of Mechatronics and Manufacturing Systems, Vol. 5, No 5/6,pp 470-494
121. Satish Chander D., J. Ramkumar, Dhamodaran S. 2012 A comparison between Raman scattering from GaNnano wires and polyhedrons Nanoscience Methods, Vol 1, pp 129-136
122. S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2012 Micro-Electric Discharge Plasma: Characterization and Applications Journal of Materials and Manufacturing processes, Vol. 27, No. 11, pp. 1208-1212, 2012.
123. S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2012 Investigation of Single Pulse Discharge on Silicon: Crater and Plasma Characteristics International Journal of Mechatronics and Manufacturing Systems, Vol 5, (5-6), pp 455-469
124. I. Sen, G. Karthikeyan, J. Ramkumar, R. Balasubramaniam 2012 A Study on Machinability of B-Modified Ti-6Al-4V Alloys by EDM Materials and Manufacturing Processes 27 (3), 348-354
125. M.R. Sankar, V.K. Jain, J. Ramkumar 2012 Effect of Abrasive Medium Ingredients on Finishing of Al Alloy and Al Alloy/SiC Metal Matrix Composites Using Rotational Abrasive Flow Finishing Applied Mechanics and Materials 110, 1328-1335
126. M. Ravisankar, J. Ramkumar, V. K. Jain 2012 Abrasive Flow Finishing (AFF) for Micro manufacturing Micromanufacturing Processes, 183
127. M. R. Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi 2012 Dependence of R-AFF process on
rheological characteristics of soft styrene based organic polymer abrasive medium
International Journal of manufacturing technology research, vol 4, issue 1/2, pp 89-104
128. G. Karthikeyan, K. Sambhav, D. Santhosh and J. Ramkumar 2012 CAD based modeling and prediction of tool wear in micro ED-milling International journal of manufacturing technology research, vol 4, issue 1/2, pp 21-34
129. S. Karthikeyan, Anuj K. Garg, J. Ramkumar, S. Dhamodaran 2012 A microscopic investigation of machining behavior in micro ED-milling Process Journal of Manufacturing Processes, Vol 4, issue 3,pp 297-306
130. G. Karthikeyan, K. Sambhav, J. Ramkumar, S. Dhamodaran 2011 Simulation and experimental realization of micro-channels using a micro ED-milling process Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.225, (12) pp.2206-2219.
131. S. Dhamodaran, D. Sathish Chander, J. Ramkumar 2011 Anti-reflective and hydrophobic surface of self organizedGaNnanoflowers Applied Surface Science, 257, 9612
132. S. Dhamodaran, D Sathish Chander, J. Ramkumar 2011 GaN nanowires grown on silicon substrates engraved using stainless-steel micro-tip Materials Letters 65, 2398-2400
133. Sandeep Nair, Trilok Singh, Ramkumar J., Sunil Jha 2011 Development and Experimental Investigation of MAF Setup for Finishing of Ultra High Speed Shafts International Journal of Abrasive Technology, Vol 4 (4), pp.. 325-345
134. Omprakash Rawat, S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2011 Magnetic Field Assisted micro EDM-Simulation of Field Distribution and Experimental Investigation International Journal of Applied Engineering Research, Vol. 6, No. 5, pp. 987-992, 2011.
135. S. Kanmani Subbu, G. Karthikeyan, J. Ramkumar, and S. Dhamodaran 2011 Plasma Characterization of Dry micro-EDM The International Journal of Advanced Manufacturing Technology, Vol. 56, pp. 187-195
136. S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2011 Single Discharge of Dry micro-EDM on Silicon: Crater and Plasma Temperature Measurement Advanced Materials Research 299, 1334-1337
137. S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2011 Elemental identification of materials using optical emission spectra during electric discharge machining Advanced Materials Research 299, 1330-1333
138. M. Ravi Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi 2011 Rheological characterization of Styrene-Butadiene based medium and its finishing performance using rotational abrasive flow finishing processes International Journal of Machine tool and Manufacture, vol 51,(12), pp. 947-957
139. S. Dhamodaran, D. S. Chander, J. Ramkumar 2011 Anti-reflective and hydrophobic surface of self-organized GaNnano-flowers Applied Surface Science 257 (22), 9612-9615
140. S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2011 Plasma Temperature and Electron Density of Dry micro-EDM on Stainless Steel and Silicon: A Comparison International Journal of Automation Technology, Vol. 5, No. 1, pp. 45-51, 2011
141. D. Sathish Chander, J. Ramkumar, S. Dhamodaran 2011 Controlled 1-D to 3-D growth mode transition of GaN nano structures and their optical properties Physica E: Low-dimensional Systems and Nanostructures 43 (9), 1683-1687
142. A. Dhabal, D. S. Chander, J. Ramkumar, S. Dhamodaran 2011 Negative differential resistance in isolated GaN nano wires with focused electron beam deposited platinum contacts Micro &Nano Letters 6 (4), 280-283
143. Sumedah Kulkarni, Syed Nadeem Akther, J. Ramkumar 2011 Experimental investigation of formability enhancement using hydraulic counter pressure assisted warm deep drawing Advanced Materials Research, Materials and Manufacturing, vol 299-300,pp. 364-367,.
144. M. Ravi Sankar, J. Ramkumar, S. Aravindan 2011 Machining of metal matrix composites with minimum quantity cutting fluid and flood cooling Advanced Materials Research, Materials and manufacturing ,vol 299-300, pp. 1052-1055
145. S. Dhamodaran, J. Ramkumar 2010 Controlling the nano-dot formation on GaAs surface during focused gallium ion beam processing Radiation effectsand defects in solids, Volume 165, (12), pp.889-893.
146. M. Ravi Sankar, V. K. Jain, J. Ramkumar 2010 Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography International Journal of Machine tools and Manufacture, Vol. 50, pp 637-650
147. V. Kumar, J. Ramkumar, P Kumar, S. K. Malhotra 2010 Mechanical and Tribological Properties of Jute Sandwich Structures Journal of Polymer Materials 27 (3), 267-281
148. A.K. Singhal, Vivek Kumar, J. Ramkumar, R. K. Singh and S. K. Malhotra 2010 Experimental investigation of mechanical and tribological performance of XNBR rubber modified epoxy under dry sliding condition International Journal of Plastic Technology, Volume 14, (1) ,pp 93-103.
149. A. K. Singhal, Rashmi R. Devi, Vivek Kumar, J. Ramkumar, R. K. Singh 2010 XNBR Toughened Epoxy-Glass Fabric Composites: An Evaluation of their Static and Dynamic Mechanical Properties International Journal of Polymer Materials, Vol.27, (2),pp. 97-112
150. K. Ponappa, S. Aravindan, P. V. Rao, J. Ramkumar, M. Gupta 2010 The Effect of Process Parameters on Machining of Magnesium Nano Alumina Composite Through EDM The International Journal of Advanced Manufacturing Technology ,Vol 46 ( 9-12) , pp 1035-1042
151. G. Karthikeyan, J. Ramkumar, S. Dhamodaran and S. Aravindan 2010 Micro ED-milling Process Performance: An Experimental Investigation International Journal of Machine tools and Manufacture, Vol. 50, PP 718-727
152. M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar 2010 Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing International Journal of Precision Technology, Vol. 1, No. 3-4, PP 302-313
153. Nagahanumaiaha, JanakarajanRamkumarb, Nick Glumacc, Shiv G. Kapoorc and Richard E. 2009 Characterization of plasma in micro-EDM discharge using optical spectroscopy Journal of Manufacturing Technology, Vol. 11, PP 82-87
154. Vivek Kumar , J. RamKumar , S. Aravindan , S. K. Malhotra, K. Vijai, Mukhul Shukla 2009 Fabrication and Characterization of ABS Nano composite reinforced by Nano sized alumina particulates International Journal of Plastic Technology, Vol. 13,( 2), pp.. 133-149
155. Amit Banerjee, TrunMankad, S. Dhamodaran, J. Ramkumar, V. N. Kulkarni 2009 The Measurement Of attogram mass Accumulation On nanostructures During e-Beam Scanning Using Carbon Nano Pillars in Resonant Mode Journal of Nano Technology, 20,(34) p 345501 (pp7).
156. Mamilla Ravi Shankar, S. Mondal, J. Ramkumar, V. K. Jain 2009 Experimental Investigations and
Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process
International journal of Advanced Manufacturing Technology, Vol. 42, (7-8) pp. 678-688
157. Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain, 2009 Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process Wear, Vol. 266, (7-8), pp 688-698.
158. Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy, 2009 Performance Evaluation and Rheological Characterization of Newly Developed Butyl Rubber Based Media for Abrasive Flow Machining Process Journal of Materials Processing Technology, Vol. 209, (4)pp. 2212-2221
159. Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy 2009 Preferential Media for Abrasive Flow Machining J. Manuf. Sci. Eng. 131(1), p 011009 (pp 11)
160. Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar 2009 Experimental investigations into rotating
workpiece Abrasive flow finishing
Wear, Vol. 267 (1-4), pp. 43-51
161. I. A. Palani, S. Kanmani Subbu, N. J. Vasa, J. Ramkumar and M. Singaperumal 2008 Laser based Surface Processing of Engineering Materials- State of the Art International Journal on Design and Manufacturing Technologies, Vol. 2, No. 1, pp. 1-9, 2008
162. Giribaskar, S., Gouthama, Prasad, R., Ramkumar, J 2008 TEM studies on recovery and recrystallisation in equal channel angular extrusion processed Al-3%Mg Alloy Transactions of the Indian Institute of Metals 61 (2-3), pp. 171-176
163. J. Ramkumar and T. Machida 2008 Defect controlled Water Jet Piercing of Continuous Fiber Journal of Advance Composite letters, Vol. 17( 2), pp. 55-63.
164. P. B. Tailor, J. Ramkumar and K. K. Kar 2007 Experimental investigation on effect of alumina filler in butyl through mechanical properties Journal of Engineering and technology, Vol. 20, 35-39
165. J. Ramkumar, A. K. Singhal, Ritesh Kumar Singh and Prashant kumar 2007 Butt joining of similar &Dissimilar pipe material by cold joining process Journal of Advanced Composite letters, Vol.16,(5), pp. 173-179.
166. B.V. Manoj Kumar, J. Ram Kumar and Bikramjit Basu 2007 Crater Wear Mechanism of TiCN-Ni-WC Cermets during Dry Machining International Journal of Refractory Metals & Hard Materials 25 (2007) 293-299.
167. B. V. Manoj Kumar, J. Ramkumar, B. Basu and S. Kang 2007 Electro-discharge machining performance of TiCN-based cermets International Journal of Refractory Metals and Hard Materials, 25 392-399.
168. K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R. K. Appaji and K. R. N. Reddy 2007 Pressure
Distribution Analysis of Fiber Reinforced Plastic Components made by Rubber PressureMolding Technique
Journal of Applied Polymer Science, Vol. 105(6) ,pp. 3333 -3354
169. Deep, K. S., Reddy, N. V., Agrawal, A., J. Ramkumar. 2006 A Mathematical Model for
Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing
Journal of Engineering Manufacture, Vol. 221 (2), pp. 155-162.
170. K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R.K. Appaji and K. R. N. Reddy 2006 Analysis of
Rubber Pressure Molding Technique to Fabricate Fiber Reinforced Plastic components
Polymer Composites, Vol. 28, (5) pp. 637-649
171. Prasanth Kumar, Axay Kumar, Kamal. K. Kar and J. Ramkumar 2006 Experimental Characterization of thin Sandwich Panel of Polymer Composite Journal of Advanced Composite letters, Vol. 15(3), pp. 89-98
172. B.V. Manojkumar, Bikramjit Basu, S. Kang and J. Ramkumar 2006 Erosion Wear behavior of TiCNNicermets containing secondary carbide (WC/NbC/TaC) Journal of American Ceramic Society, Vol. 89(12), pp. 3827-3831
173. J. Ramkumar, Malhotra S.K., and R. Krishnamurthy 2005 Effect of microwave treatment of WC
inserts for drilling of GFRP composites
Machining Science and Technology 9(2): 263-269
174. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy, 2004 Effect of workpiece vibration on drilling of GFRP laminates Journal of Materials Processing Technology, 152(3), 329-332
175. J. Ramkumar, Aravindan. S, S. K. Malhotra and R. Krishnamurthy 2004 An enhancement of machining performance of GFRP by oscillatory assisted drilling International Journal of Advanced manufacturing technology, 23(3-4): 240-244
176. J. Ramkumar, A. Kaakitsuji. S.K. Malhotra, R. Krishnamurthy, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii 2003 Mechanical and erosion behavior of Ti-47Al-3W/Ti2AlC composites by reactive arc melting Journal of Advanced composites letters, 12(4), 141-148
177. J. Ramkumar, S. KMalhotra, R. Krishnamurthy, Mabuchi. H, K. Demizu, K. Kakitsuji, H. Tsuda, T. Matsui and K. Morii 2003 Microstructure and dry sliding wear of Ti-50Al alloy and Ti-47Al-3W/Ti2AlCcomposites produced by reactive arc-melting Journal of Material Transactions, 44(9), 1861-1865
178. S. Aravindan, J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2003 Enhancement of cutting performance of cemented carbide cuttings tools by microwave treatment Microwave and Radio Frequency Processing Ceramic Transactions, 199-206, 2003.
179. Morikawa. D, J. Ramkumar, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii, 2002 Microstructure and mechanical properties of Ti-B-N cast alloys prepared by reactive arc-melting Journal of Material Transactions, 43(8), 2193-2196
180. A. Kakitsuji, J. Ramkumar, J. kinose, H. Mabuchi, H.Tsuda and K. Morii 2002 Synthesis of TiAl(Cr)/Ti2AlC composites by reactive arc-melting Journal of Materials Transactions, 43(10), 2589-2592
181. J. Ramkumar, S. Aravindan, S. K. Malhotra, and R. Krishnamurthy 2002 Enhancing the metallurgical properties of WC insert (K-20) cutting tool through microwave treatment Journal of materials letters, 53(3), 200-204.
182. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2002 Studies on drilling of glass/epoxy laminates using coated high-speed steel drills Journal of Materials and Manufacturing Processes, 17(2), 313-322
183. J. Ramkumar, R. Krishnamurthy and S. K. Mal 2001 Influence of tool status on flexural strength of machined CFRP components Journal of Advanced composites letters, 10(4), 178-187
184. J. Ramkumar, SK Malhotra, R Krishnamurthy 2000 Online monitoring of oscillatory drilling of polymeric composites through acoustic emission Indo-German Workshop on High Temperature Fibre Composite Materials, 231-242
185. S. Aravindan, J. Ramkumar and R. Krishnamurthy 2000 Microwave Joining of Al2O3 and SiC with Glass Inter layer Microwave and Radio Frequency Processing Ceramic Transactions Vol 3, 287-294