Papers Published in Conference Proceedings
| S.No. | Author(s) | Year | Title | Name and Place of Conference |
|---|---|---|---|---|
| 1. | Mahavir Singh,Pragya Tripathi, J. Ramkumar | 2021 | Large area surface texturing through electrical discharge micromachining process for inducing hydrophobicity | 8th International and 29th All India Manufacturing Technology, Design and Research Conference, Virtual Conference, 09-11, December 2021, PSG College of Technology, and PSG Institute of Technology and Applied Research, Coimbatore, Tamil Nadu, India. |
| 2. | Mahavir Singh,Devesh Kumar Chaubey, J. Ramkumar | 2018 | Numerical Simulation of the Micro-EDM Process using Multi-Spark Approach | Annual Technical Volume of Production Engg. Division Board: The Institute of Engineers (India), Vol.III 2018 |
| 3. | H. Sheokand, G. Singh, S. Ghosh, M. Saikia, K.V. Srivastava, J. Ramkumar, S. Anantha Ramakrishna | 2018 | An Optically Transparent Microwave Broadband Absorber using Resistive Sheet | National Conference on Communication |
| 4. | Singh, A., Singh, S., Philip, D., Ramkumar, J. | 2017 | A review on NIOSH lifting equation applicability | IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2017: Proceedings |
| 5. | Singh, A., Philip, D., Ramkumar, J. | 2017 | A review on work environment quality in shop floor: Impact of aerosols | IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2017: Proceedings |
| 6. | T. U. Siddiqui, J. Ramkumar | 2017 | Micro-wire electric discharge machining of Mg alloy used in biodegradable orthopaedic implants | ICEMS 2017 |
| 7. | B.S. Ajay Vardhaman, M. Amarnath, J. Ramkumar | 2017 | Experimental investigation on the tribological behaviour of nano boric acid and FMWCNTs as oil additives on bronze alloy surface | International Conference on Manufacturing Technology and Simulation (ICMTS), IIT Madras 2017 |
| 8. | Y.K. Penke, G. Anantharaman, J. Ramkumar, K.K. Kar | 2017 | Redox active Mn-Al-Fe ternary metal oxide Nano adsorbent for Arsenic Remediaion and Mitigation by Significant As (0) formation behavior | 5th Nano Today Conference, December 6-10, 2017 (Hawaii, USA) |
| 9. | Gaganpreet Singh,J. Ramkumar, S. Anantha Ramakrishnan | 2017 | Micromachining of Silicon using Excimer laser for MEMS applications | Proceedings of 10th international conference on Precision,Meso,Micro and Nano Engineering (COPEN 10) |
| 10. | Vyom Sharma, V.K. Jain and J. Ramkumar | 2016 | Experimental Analysis of Wire Electrochemical Machining Process | AIMTDR 2016,College of Engineering Pune |
| 11. | Mahavir Singh, V.K. Jain and J. Ramkumar | 2016 | Experimental Investigations into Turbulated Holes using Shaped Tube Electrochemical Machining | AIMTDR 2016,College of Engineering Pune |
| 12. | Sahil Kajal , V.K Jain, J.Ramkumar, Leeladhar Nagdeve | 2016 | Experimental investigation into international abrasive finishing of a helical grooves of a revolver barrel | AIMTDR 2016,College of Engineering Pune |
| 13. | Abhilasha Singh, Divyansh Patel, J. Ramkumar, Kantesh Balani | 2016 | Viscosity Affecting Wettability of Laser Textured Surfaces | AIMTDR 2016,College of Engineering Pune |
| 14. | Leeladhar Nagdeve, V. K. Jain, J. Ramkumar | 2016 | Experimental investigation into Nano finishing of micro-channels | 3rd international conference on Nanotechnology for better living |
| 15. | Gaganpreet Singh, Shashank Sharma, Kartar Singh and J. Ramkumar | 2016 | Feasibility study of micromachining of silicon wafer with excimer Laser using COMSOL multiphysics | Proc. of the Intl. Conf. on Nanotechnology for Better Living, 2016 |
| 16. | Sharma, S., Akhtar, S. N., Pachaury, Y., & Ramkumar, J. (2015) | 2016 | A study on hydrodynamics of melt expulsion in Nd:YAG laser drilling of titanium | Proceedings of COMSOL CONFERENCE 2015, Pune India |
| 17. | G. Parameswari, V.K.Jain, J. Ramkumar | 2016 | Experimental investigations into nano finishing technique for flat ti-6al-4v disc | Conference AIMTDR 2016 |
| 18. | G.Parameswari, V.K.Jain, J. Ramkumar | 2016 | Development of nano finishing technique for flat and curved plates | Proc. of the Intl. Conf. on Nanotechnology for Better Living, 2016. |
| 19. | A.S. Milani, D. Frey, R. Seethaler, J. Ramkumar, B. Crawford, H. Teimouri, F. Islam, P. Pal | 2016 | A roadmap to account for potential uncertainties in non-destructive testing during structural health monitoring of composites | (2016) 31st ASC Technical Conference and ASTM D30 Meeting, September 19-22, Williamsburg, USA |
| 20. | G. Parameswari Guides: Dr.V. K . Jain, Dr. J Ramkumar | 2016 | Magneto rheological finishing of Ti-4Al-6V disc | International conference on nanotechnology for better living (Accepted) |
| 21. | Prashnath K, Divyansh Patel, V. K. Jain, J. Ramkumar | 2016 | Finite element analysis for shape prediction of micro-dimples produced through ECMM | International conference on nanotechnology for better living (Accepted) |
| 22. | Vishal Kumar, J. Ramkumar, R. K. Gupta | 2016 | Optimization Study of Electric Discharge Trepanning Process on CP70 | International conference on nanotechnology for better living (Accepted) |
| 23. | Abhilasha Singh, Divyansh Patel, J. Ramkumar, K. Balani | 2016 | Micro-channels fabrication through pulsed Nd:YAG laser on Ti6Al4V | International conference on nanotechnology for better living (Accepted) |
| 24. | Hitendra Kumar, J. Ramkumar, K. S. Venkatesh | 2016 | Micro/Nano Surface texture evaluation by reconstruction from images using approximated BRDF model | International conference on nanotechnology for better living (Accepted) |
| 25. | Divyansh Patel, V. K. Jain, J. Ramkumar, Ankit Shrivastava | 2016 | Preliminary study of effect of surface texturing on hypodermic needles | International conference on nanotechnology for better living (Accepted) |
| 26. | Leeladhar Nagdeve, V. K. Jain and J. Ramkumar | 2016 | Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint | joint18th CIRP International conference on Electro Physical and Chemical Machining (ISEM XVIII) (Accepted) |
| 27. | Ajay Vardhaman B.S, DurweshJhodkar, J. Ramkumar, M. Amarnath, H. Chelladura | 2015 | Examining the Role of Cutting Fluids in Machining AISI 1040 Steel Using Tungsten Carbide Insert under Minimal Quantity Lubrication Condition | Institute of Engineers (IIE Conferences), London (UK),2015. |
| 28. | Sharma, S., Akhtar, S. N., & Ramkumar, J. | 2015 | A study on millisecond underwater laser ablation of thin titanium sheets | proceedings of COPEN15 IIT Bombay. |
| 29. | F. Islam, J. Ramkumar, A.S. Milani | 2015 | Prediction and quantification of damage during milling of unidirectional carbon fiber reinforced plastics (CFRPs) | International conf. on manufacturing of advanced composites (ICMAC 2015), June 24-25, Bristol, UK |
| 30. | Vishal Kumar, J. Ramkumar, R. K. Gupta | 2015 | Experimental Investigations on Micro-hole EDM Drilling in γ-TiAl | International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-9) |
| 31. | Leeladhar Nagdeve, V. K. Jain and J. Ramkumar | 2015 | Nano-finishing of freeform/Sculptured surfaces: A review | International conference on Precision, Meso, Micro and Nano Engineering (COPEN9) |
| 32. | J. Ramkumar, Syed Nadeem Akhtar and S. A. Ramakrishna | 2015 | Large area texturing of metal surfaces | 3rd International Conference on Laser and Plasma Applications in Materials Science, Jan 2015, Kolkata. |
| 33. | Ajay Vardhaman B.S, DurweshJhodkar, J. Ramkumar, M. Amarnath, H. Chelladurai | 2014 | Tool wear assessment in turning AISI 1040 steel using cutting force signature analysis | International Colloquium on Materials, Manufacturing and Metrology (ICMMM-14), IIT Madras. 2014 |
| 34. | Gupta, T.V.K., Ramkumar J., Puneet Tandon and Vyas, N.S. | 2014 | “State of the art on Abrasive Water Jet milling: Challenges ahead” |
ICMMM 2014 International Colloquium on Materials, Manufacturing and Metrology, August 8-9, 2014, IIT Madras. Ref No. ICM2586 |
| 35. | Syed Nadeem Akhtar, Shashank Sharma and J. Ramkumar | 2014 | Fabrication of micro lens array by excimer laser micromachining | 5th International and 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014 |
| 36. | J.M. Jafferson, P. Hariharan and J. Ram Kumar | 2014 | Effect of Layer Thickness in Micro Electric Discharge Milling: An Experimental Investigation | 5th International and 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014 |
| 37. | T. V. K. Gupta, J. Ramkumar, Puneet Tandon and N. S. Vyas | 2014 | Application of Grey Relational Analysis for Geometrical Characteristics in Abrasive Water Jet Milled Channels | 5th International and 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014 |
| 38. | Sachin Singh, M. Ravi Sankar,V. K. Jain and J. Ramkumar | 2014 | Modeling of Finishing Forces and Surface Roughness in Abrasive Flow Finishing (AFF) Process Using Rheological Properties | 5th International and 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014 |
| 39. | Ravi Kumar Dungroth J. Ramkumar, and S. Kanmani Subbu | 2013 | Multi Objective Optimization of EDM Parameters on Machining Carbon-Carbon Composites using RSM-GRA Approach | An International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8) |
| 40. | S. Kanmani Subbu, S. Dhamodaran, and J.Ramkumar | 2013 | EDM and µ-EDM Plasma Parameters Measurement: Overview | A National Conference on Manufacturing: Vision for Future (MVF-2013), IIT Guwahati |
| 41. | Kanmani Subbu, J. Ramkumar & S. Damodharan | 2013 | Effect of magnetic field in single discharge dry micro EDM on Si and Stainless steel | 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-67138 |
| 42. | Syed Nadeem Aktar, J. Ramkumar and S. Antharama krishnan | 2013 | Microfeature edge quality optimization in excimer laser ablation of metallic film | 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64149 |
| 43. | Vaibhav shukla, S. Nadeem, S. Kanmani Subbu and J. Ramkumar | 2013 | Fabrication of complex Micro-channels by micro EDM Milling | 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64031 |
| 44. | Gupta, T.V.K., Puneet Tandon, Ramkumar J. and N.S Vyas | 2013 | Influence of process parameters on the dimensions of the channels prepared using abrasive water jet machining | 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64063 |
| 45. | T V K Gupta, J. Ramkumar, Puneet Tandon, N S Vyas | 2013 | Role of process parameters on pocket milling with Abrasive Water Jet Machining technique | International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, ICAMAME 2013, Dubai, UAE. Published in Word Academy of Science, Engineering and Technology, Issue 82, October, 2013, pp.1374-1379. |
| 46. | Rajesh Kr. Porwal, Vinod Yadava and J. Ramkumar | 2013 | Optimization of process parameters in the hole sinking electro discharge micromachining using GRA-PCA | Proceedings of the International conference on Recent Advances in Material Processing Technology, (RAMPT-13). |
| 47. | S. Kanmani Subbu, S. Dhamodaran, and J. Ramkumar | 2012 | Micro-electric Discharge Plasma: Characterization and Applications | International conference on Microactuators and Micromechanisms (MAMM-2012), CSIR-CMERI, Durgapur, India |
| 48. | S. Kanmani Subbu, S. Dhamodaran, and J. Ramkumar | 2012 | Investigating of Single Discharge Dry Micro EDM on Different Planes of Silicon | 4th International & 25th (AIMTDR-2012), Jadhavpur university, Kolkata, India |
| 49. | T. V. K. Gupta, J. Ramkumar, S. Nalinaksh Vyas and Puneet Tandon | 2012 | Material removal rate prediction for blind pocket milling of SS304 using Abrasive Water Jet Machining Process | Hong Kong International Conference on Engineering and Applied Science (HKICEAS) Hong Kong, (Paper No. 411) |
| 50. | T. V. K. Gupta, J. Ramkumar, S. Nalinaksh, Vyas and Puneet Tandon | 2012 | A Preliminary Investigation on the forces generated with process parameters during Abrasive Water Jet Milling on SS304 | International Conference on Innovations in Design and Manufacturing (InnDeM 2012), PDPM IIITDM J, Dec.05-07, 2012 (paper No. 2032). |
| 51. | S. Kanmani Subbu, Jitendra Kumar Kateiyar, A. Chalvane, J. Ramkumar, and S. Dhamodaran | 2011 | Fe-Cu Alloy Nano-particles Generation by Electric Discharge Machining | 6th International Conference on Micro Manufacturing (ICOMM-2011), Tokyo Denki University, Japan, March 7-10, 2011, pp. 213-218 |
| 52. | S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran | 2011 | Micro EDM on Silicon | 26th National Convention of Production Engineers and National Seminar on New Vistas Production Technologies, Jaipur, Rajasthan, India , pp.79 |
| 53. | Omprakash Rawat, S. Kanmani Subbu. J. Ramkumar, and S. Dhamodaran | 2011 | Magnetic Field Assisted micro EDM–Simulation of Field Distribution and Experimental Investigation | National Conference on Design and Manufacturing (NaConDM-2011), IIITD&M (Kancheepuram) 27-28, May 2011, pp. 997-992 |
| 54. | Omprakash Rawat , S. Kanmani Subbu, J. Ramkumar, and S.Aravindan | 2011 | Crater Diameter of Single Discharge Micro EDM: Modeling and Experimental Comparison | International conference on Advanced Materials and Processing (ICAMP-2011), R M K Engineering College, Chennai, India |
| 55. | Rajesh Kr. Porwal, Vinod Yadava, J. Ramkumar | 2011 | Multi-Objective Optimization of Hole Drilling Electro Discharge Micromachining Process | Proceedings of the International conference on precision, Meso, Micro and Nano engineering (COPEN-2011) |
| 56. | G. Karthikeyan, K. Sambhav, D. Santhosh and J. Ramkumar | 2010 | CAD Based Modeling and Prediction of Tool Wear in µED-milling | 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, December13-15, 2010. |
| 57. | M. Ravi Sankar, V. K. Jain and J. Ramkumar | 2010 | Dependence of AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium | 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, December13-15, 2010. |
| 58. | Kumar Pallv, J. Ramkumar, Nagahanumaiah, and Kornel F. Ehmann | 2010 | Comparative Assessment of the Laser Induced Plasma Micro-machining (LIP-MM) and the Micro-EDM Process | International Forum on Micro Manufacturing (IFMM) 2010, Gifu, Japan, 20-23 October ’10 |
| 59. | Kumar Pallv, J. Ramkumar, Nagahanumaiah, and Kornel F. Ehmann | 2010 | Numerical Simulation of the Laser Induced Plsma Micro-machining Process (LIP-MM) | (IWFM) 2010, 7th International Workshop on Microfactories, Daejeon Convention Centre, Korea, 24-27 October ’10 |
| 60. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran, and Sujith Sagar | 2010 | Investigating Non Conventional Machining of Silicon | 3rd International & 24 th AIMTDR-2010, Andra Pradesh, India,13-15 December ’10 |
| 61. | S. Kanmani Subbu, Jitendra Kumar Kateiyar, J. Ramkumar, | 2010 | Dry Micro-Electric Discharge Deposition of Copper on Die steel: Effect of Pulse on-time | International Workshop on Micro Factories (IWFM) 2010, 7th International Workshop on Microfactories, Daejeon Convention Centre, Korea, 24-27 October ’10 |
| 62. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran | 2010 | Invesigation of dry micro-EDM: single pulse discharge on silicon | International Forum on Micro Manufacturing (IFMM) 2010, Gifu, Japan, 20-23 October ’10 |
| 63. | Kumar pallav and J. Ramkumar | 2010 | Micro -manufacturing processes: A Brief Overview | RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10. |
| 64. | G. Karthikeyan, J. Ramkumar and S. Aravindan | 2010 | A Study on Tool Wear in Micro Electric Discharge Milling ( Micro ED-milling) Process | RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10. |
| 65. | M. Ravi Sankar, and J. Ramkumar | 2010 | High Speed Hard Turning With Minimum Quantity Lubrication | RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10 |
| 66. | Vivek Kumar and J. Ramkumar | 2010 | Effect of Humidity on Impact Behavior of Glass Fiber/Epoxy Sandwich Structures | RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10. |
| 67. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran | 2010 | Plasma and Crater characteristics of dry EDM | RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10. |
| 68. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran | 2010 | Plasma characteristics of dry EDM | RAMTM-2010, National conference on Recent Advances in Manufacturing Technology and Management, Jadavpur University, Kolkata,19-20 Feb 10. |
| 69. | T. V. K. Gupta, J. Ramkumar, N. S. Vyas | 2009 | A study on the effect of process parameters in blind pocket milling using Abrasive Water Jet Machining | 6th International Conference on Precision, Meso, Micro and Nano Manufacturing (COPEN6), 11-12 Dec. 2009, PSG College of Engineering, Coimbatore, pp. B28-32 |
| 70. | Vivek Kumar , A. K. Singhal, J. RamKumar , S. Aravindan, S. K. Malhotra | 2009 | Mechanical and Tribological behavior of Glass-Epoxy Composites Modified using XNBR Elastomer | TRIBO-INDIA Conference on Tribology of Automotive Systems, IIT Delhi |
| 71. | Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain | 2009 | Nano-finishing of metal matrix composites using polymer rheological abrasive medium | Processing and fabrication of advanced materials (PFAM18), Tohoku University, Sendai, Japan |
| 72. | G. Karthikeyan, J. Ramkumar and S. Aravindan | 2009 | Dimensional Analysis of Tool Wear Rate in u-EDM Milling Process | COPEN 6, International Conference on Precision, Meso, Micro and Nano Engineering, Coimbatore |
| 73. | S. Dhamodaran, J. Ramkumar, V. N. Kulkarni | 2009 | Focused ion beam fabricated nano structures: Mass sensor to opto-electronics | Theme meeting on quantum structures, BARC, Mumbai, |
| 74. | Amit Banerjee, Trun Mankad, S. Dhamodaran, J. Ramkumar, V. N. Kulkarni | 2009 | Exploring vibration aptitude and atto-gram mass sensing ability of FIB fabricated nano-pillars | International coference cum workshop on nanosciece and nanotechnology, Ansal institute of technolgy, Gurgaon |
| 75. | Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar | 2009 | Experimental investigations into rotating workpiece abrasive flow finishing | International conference on Wear of Materials (WOM-09), Las Vegas, 2009. |
| 76. | Tarun Mankad, Amit Banerjee, S. Dhamodaran, J. Ramkumar and V. N. Kulkarni | 2009 | Dynamic Characterization of Nano Composite Pillars | ME Department Poster Presentation, IIT Kanpur, |
| 77. | G. Karthikeyan, J. Ramkumar, Shalabh | 2009 | Estimation of diameter during machining of Tungsten electrode by micro Block EDG process, Design and Manufacturing Issues Relevant to Automotive and Allied Industries | IPRoMM-2009, Chennai, India |
| 78. | S. Kanmani Subbu, J. Ramkumar, N. J. Vasa | 2009 | Parametric investigation on Laser shock processing (LSP) parameters using Dimensional Analysis, Design and Manufacturing Issues Relevant to Automotive and Allied Industries | IPRoMM-2009, Chennai, India |
| 79. | G. Karthikeyan, J. Ramkumar | 2009 | Micro Fabrication through micro EDM | International Conference on Advanced Manufacturing And Automation Incama WHERE? |
| 80. | S. Kanmani Subbu, J. Ramkumar, N. J. Vasa | 2009 | Investigation on Laser Shot Peening (LSP) of Ti alloys | International Conference on Emerging Research and Advances in Mechanical Engineering, Chennai, India |
| 81. | R. Sandeep Nair, G. Karthikeyan, J. Ramkumar, Sunil Jha, Anil Varghese | 2008 | Development of MAF setup for finishing of ultra high speed shafts | 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference WHERE? |
| 82. | M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar | 2008 | Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing | 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, IIT Madras (India) |
| 83. | Anuj Kumar Garg, Nagahanumaiah, J. Ramkumar, Nick Glumac, S. G. Kapoor, R.E. De vor | 2008 | Understanding Gap Phenomena in Micro EDM process using underwater acoustics | IWMF, Chicago, US |
| 84. | Nagahanumaiah, J. Ramkumar, Nick Glumac, S. G. Kapoor, R. E. De vor | 2008 | Characterization of plasma in Micro-EDM discharge using Optical Spectroscopy | ICOMM – 08, September 2008 Carnegie Mellon, US |
| 85. | Piyushkumar B Tailor, J. Ramkumar, Kamal K. Kar | 2008 | Rubber Composite: a Deformable Nano Finishing Tool for Viscoelastic Flow Finishing Process | ICCE, KUNMING CHINA. |
| 86. | S. Aravindan and J. Ramkumar | 2008 | Tribological Performance of Nano Alumina Composites | International Conference on Sintering 2008, California, USA. |
| 87. | Sandeep Nair and J. Ramkumar | 2008 | State of the art Magnetic Abrasive Finishing | 14th International Conference on Frontiers in Design and Manufacturing Engineering (ICDM), India. |
| 88. | S. Giribaskar, Gouthama and J. Ramkumar | 2007 | Role of SiCP on the Microstructural Evolution of ECAE Processed Al-10%SiCP | MMC International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing (IINCCOM- 6), Indian Institute of Technology, Kanpur |
| 89. | S. Giribaskar, Gouthama, J. Ramkumar and R. Prasad | 2007 | TEM Studies on Recovery and Recrystallisation in SPD Processed Al-3%Mg Alloy | International Conference on Metals And Alloys: Past, Present And Future (METALLO-2007), Indian Institute of Technology, Kanpur, |
| 90. | R. S. Pawade, S.S. Joshi, P.K. Bramankar and J. Ramkumar | 2007 | Effect of electrode shape and rotation on EDM performance of Inconel 718 | International and INCCOM-6 conference on future trends in composite materials and processing, India. |
| 91. | Piyushkumar B. Tailor, J. ramkumar and Kamal. K. Kar | 2007 | Composite: A Deformable Nano finishing tool | International and INCCOM-6 conference on future trends in composite materials and processing, India. |
| 92. | Piyushkumar B. Tailor, J. Ramkumar and Kamal K. Kar | 2007 | “Rheological Characterization of Uncured Alumina Filled Butyl Composite | ICADM, Madurai, India. |
| 93. | Prasanth Kumar, Rajeev Kumar and J. Ramkumar | 2007 | High Strength joints using GRPF: An experimental Study | Engineering Design IN-2007, Bangalore, India. |
| 94. | Sivaswamy Giribaskar, Gouthama, J. Ramkumar and Rajesh Prasad | 2006 | Ultra-fine grained Metallic Materials by Severe Plastic Deformation | International Conference on Recent Advances in Materials and Processing), PSG College of Technology, Coimbatore |
| 95. | Piyush B Tailor, Ahankari S. Sureshrao, Ramkumar J. and Kamal K. Kar | 2006 | Abrasive Flow Machining of Carbon-Carbon Composites using Styrene Butadiene Rubber | Nano Finishing, IRIkerala 2006, India |
| 96. | S. Srivastava, J. Ramkumar and Kamal. K. Kar | 2006 | Fabrication of ABS-Alumina Nanocomposites”, Indo-Japan Workshop on Nanotechnology composites | IIT Kanpur. |
| 97. | Prabhat Agnihotri, Ariful Rahaman, Niranjan patra, J. Ramkumar, S. Basu and Kamal. K. Kar | 2006 | Influence of process parameters of electroless Ni-P coating on carbon fibers | APMC, Chennai, India |
| 98. | J. Ramkumar, “Microwave towards Nanomanufacturing | 2004 | Indo-Japan Workshop on Nanotechnology | Tokyo, Japan. |
| 99. | S. K. Malhotra, R. Krishnamurthy and J. Ramkumar | 2004 | Modelling of Left over strength in Drilling of Composites Laminates | COMPTEST, Bristol. |
| 100. | J. Ramkumar, S. K. Malhotra and R. Krishnamurty | 2004 | Damage Tolerancing of Drilling of GFRP composites | CAMMT, India |
| 101. | S. Aravindan, J. Ramkumar and A. K. Sharma | 2004 | Role of microwave in manufacturing | CAMMT, India |
| 102. | J. Ramkumar, S. K. Malhotra and R. Krishnamurthy | 2003 | Effect of Lay-up on drilling of GFRP composites | ICCST- 2003, South Africa. |
| 103. | J. Ramkumar, S. K. Malhotra and R. Krishnamurthy | 2003 | Effect of workpiece vibration on drilling of GFRP laminates | ISAMPE, India. |
| 104. | J. Ramkumar, R. Krishnamurthy and S. K. Malhotra | 2001 | On-line monitoring of material response of GFRP composites during ultrasonic machining through Acousctic Emission | CAR & FOF 2001, South Africa. |
| 105. | J. Ramkumar, R. Krishnamurthy and S. K. Malhotra | 2001 | Ultrasonic drilling of polymeric composites | CANCOM 2001, Canada. |
| 106. | J. Ramkumar, R. Krishnamurthy and S. K. Malhotra | 2000 | Defect Evaluation through online monitoring on Drilling of Carbon reinforced composites using brazed WC Inserted Drill | Manufacturing Engineering in twenty first century-2001, 25-28, India. |
| 107. | J. Ramkumar, S. Aravindhan, S.K. Malhotra and R. Krishnamurthy | 2000 | Drilling of Fiber reinforced composites using microwave treated cutting WC inserts | RAMP-2001, 358-365, India |
| 108. | J. Ramkumar, S. Arul, S. K. Malhotra and R. Krishnamurthy | 2000 | Online monitoring of oscillatory drilling of polymeric composites through acoustic emission | High temperature Fiber composite materials-2000, India. |
| 109. | J. Ramkumar, S. Aravindan and R. Krishnamurhty | 2000 | Response of High Frequency, low amplitude impact and Low frequency, High amplitude impact test on joining of SiC by microwave hybrid heating techniques | International Seminar on Manufacturing technology beyond 2000, India. |